Case IH Grain harvesters™

Working width of the capturing device: 7.62 m (25’) | 9.14 m (30’) | 10.7 m (35’)
Type & version: For grain, equipped with a cutting bar
Weight: 2,113 kg | 2,554 kg | 2,980 kg
Auger: 660 mm diameter, rotational speed 158 rpm
Reel: 1,016 66, 6 cleats, hydraulic drive, rotational speed 5 to 61 rpm
Cutting device: Segment, 76.2 mm (3 inches), for “continuous cut” of “Sta-Sharp”

Working width of the capturing device: 7.62 m (25’) | 9.14 m (30’)
Type & version: For grain - with adjusted position of the cutting device
Weight: 2.450 kg | 3.135 kg
Auger: 1.070 mm diameter - rotational speed 135/166 rpm
Reel: 1.016 mm- 6 cleats - hydraulic drive - rotational speed 0 to 60 rpm
Cutting device: Segment - 76.2 mm (3 inches) for “continuous cut” of “Sta-Sharp”

Working width of the capturing device: 9.1 m (30’) | 10.7 m (35’) | 12.2 m (40’) | 14 m (45’)
Type & version: Harvester for collecting grain crops with a belt conveyor, a flexible bar and a top screw for collecting rapes
Weight: 2,837 kg | 3,352 kg | 3,783 kg | 4,256 kg
Auger: 660 mm diameter, rotational speed 158 rpm
Reel: Diameter 1.070 mm, horizontal stroke 578 mm, vertical stroke 201 mm, 6 cleats, hydraulic drive, speed 0 to 60 rpm
Overall width/length: 2.1/1.73 m 
Cutting device: Toothed knife, knife stroke frequency 630 cycles per minute, hydraulic drive through the gearbox, cutting height 2.5 cm and more