Semi-mounted plows on the KUHN MULTI-LEADER support wheel™

A single-wheeled plow that maximizes your efficiency

The MULTI-LEADER XT plow is available in versions from 7 to 9 units for aggregation with tractors from 210 to 405 hp.

LEADER XT single-wheel semi-mounted plows have been designed to take full advantage of traction power and increase your productivity. You save precious time on turns thanks to the extraordinary maneuverability of the LEADER line.
Simple and easily accessible settings without tools allow to reach ideal quality of plowing irrespective of working conditions.
MULTI-LEADER XT models are available in versions from 6 to 8 housings for aggregation with tractors from 210 to 405 hp. The LEADER line perfectly meets the requirements of both farms and contractors and has the best price. 
A design designed to save your time

LEADER line models are designed to make your job easier:
 a turning radius of 110 ° makes it possible to shorten the path on turns.
the considerable distance between a rod and the first bit allows to work without risk of damage of a tractor even at the shortest turns. This means less fatigue and more peace of mind for the operator.
the number of hydraulic valves operating during reversals is reduced due to the hydraulic sequence that is standard on the entire line.
optimal comfort due to the gradual reversal. Turns are performed smoothly with two telescopic cylinders of single action. The load on the tractor lifting levers is reduced.

Simple settings for perfect results

Basic settings are performed without tools and are easily identifiable:
The working depth is adjusted by means of aluminum wedges, easily accessible on the lifting cylinder. Changing the depth of plowing is not easier!
Precise adjustment of the vertical adjustment is carried out by means of independent locking screws on the left and right.
For optimal plowing, the front furrow adjustment (position of the first body relative to the tractor tire in the furrow) is carried out by means of a mechanical connecting rod.
Option: The hydraulic cylinder provides the possibility of adjustment from the tractor cab. The indicator, which is visible from the tractor cab, allows you to monitor changes in conditions.

Clearly optimized plowing

The best plowing quality by reducing the wheel pressure on the ground:
Working near the edges of the field is important to maximize usable area, but also to limit weeds around the field. To meet this need, the wheel was placed at the minimum possible distance from the chassis.

Choose the ease of plowing with a large wheel:

Less traction power required

Great work in difficult conditions
KUHN offers two types of wheels to meet your needs:
Ribbed profile, diameter 1000 x 500 mm
Agricultural profile, diameter 1200 x 500 mm

Strong structure - a guarantee of reliability

The design and dimensions of the LEADER plows meet the strictest intensity requirements.
Designed for aggregation with tractors from 135 to 360 hp, this model has a beam 180 x 180 mm,
which gives it high strength
A wide range of traction categories (categories 3, 4N, 4, K700 and Quickhitch 3 and 4N) is available to enable aggregation with all medium and high power tractors. High versatility: to change from one category to another, you only need to change the mounting washers!